LATCHING RELAY PCB
Alert Control Technologies’ (A.C.T.) latching relay interface PC board is ideal for signal switching in robotics, alarm systems, industrial automation, monitoring, and communication systems. This design is tailored for use in solar powered installations, but readily lends itself to many applications using 12VDC power. 5VDC and 24VDC versions are also available. Mounts to standard Augat 3” Snap Track, which can be adapted to a variety of mounting options. Contact A.C.T. for special application assistance.
• Implements a diode protected magnetically latched relay for switching purposes
• Equipped with pulse sensitive inputs
• Extremely low power consumption. Uses power only while changing states in pulsed input applications
• Provides a reliable, electrically isolated interface between systems when a latched dry contact output is desired.
LATCHING RELAY PCB
Alert Control Technologies’ (A.C.T.) latching relay interface PC board is ideal for signal switching in robotics, alarm systems, industrial automation, monitoring, and communication systems. This design is tailored for use in solar powered installations, but readily lends itself to many applications using 12VDC power. 5VDC and 24VDC versions are also available. Mounts to standard Augat 3” Snap Track, which can be adapted to a variety of mounting options. Contact A.C.T. for special application assistance.
• Implements a diode protected magnetically latched relay for switching purposes
• Equipped with pulse sensitive inputs
• Extremely low power consumption. Uses power only while changing states in pulsed input applications
• Provides a reliable, electrically isolated interface between systems when a latched dry contact output is desired.
Applying 12VDC (pulse or continuous) to the “-“ and “S” terminals on the input side generates closed contacts between “S1” and “C1”, as well as between “S2” and “C2”.
Applying 12VDC (pulse or continuous) to the “-“ and “R” terminals on the input side generates closed contacts between “R1” and “C1”, as well as between “R2” and “C2”.
• Either event causes the outputs to “latch” in that state until an opposite input is applied.
• Dual form C outputs allow for normally open or normally closed operation.
• Dual relay coils use the same polarity whether setting or resetting the circuit.
• No operating power is required unless output is being toggled.
Input: 11 – 14.4 VDC (pulse or continuous
Input resistance (max): 500 Ohms
Contacts: Gold plated, Form C, 2 sets
Switched voltage (max): 220 VDC, 250 VAC
Switched current (max): 2Amp DC/AC
Expected life: 1,000,000 cycles @ 30VDC 2A switched
Power Consumption: 360mW pulse or continuous
Max Speed: 20 cycles per minute @ rated load, 50 cycles per second @ low level load
Open contact resistance: >100Mohm @ 500 VDC
Minimum pulse length for Set/Reset: 50mS
Operating Temperature: -40 to 158 F
Operating Humidity: 5 to 85%, non-condensing
Dimensions: 3” x 1.875” x .625”
GET IN TOUCH TODAY
Contact us today with any questions you may have. We’re happy to help and will respond to your questions promptly.
9421 FM 2920, Bldg. #26
Tomball, TX 77375
Tel: (281) 288-1321
Fax: (281) 288-2165
